Skip to content

Budda Blues Guitar wiring

One of the interesting parts of the BBG guitar was its electronic plan and that is what we are going to talk about this week.

For the first prototype we had the following wiring:

– General volume and one general to (TBX by Fender with a Orange drop cap).

– Freeway Ultra 6 positions toggle switch

– Slidding switch for bridge+neck in series or parallel

– Sliding switch that would override the 6 way toggle switch and give bridge+neck in out of phase, with a dedicated volume for each pickup

– Sliding switch for choosing between no treble bleed or two different treble bleeds.

Now the first consideration is that there are two references of the Freeway toggle switch. For the pickups combination Budda wanted we needed the Freeway Ultra 3×3-05 has this one allows us to access its all 28 terminal connections points in the back. Its the most flexible! We needed to have the 3 pickups individually from positions 1 to 3,and this was the factor why we needed this version. On the other 3 we have bridge+middle, bridge+neck and middle+neck.

After a test period of the prototype, Budda decided to change things a little. He was not finding the option of having the bridge+middle in series or parallel that much interesting so we decided to change it. The decision was to have a sliding switch that also overrides the pickups selector to give us bridge+ neck.

At the same time we changed the two dedicated volumes that were used with the neck+bridge in out of phase options and replaced them with two blend pots, one for each overriding switch.

So at this point, we have 3 ways to access this particular pickup combination (bridge+neck):

1- The simple option on the 6 way toggle switch. From pickups to toggle switch and then to general volume and tone pots.

2- Override number 1 gives us both pickups going straight to one blend pot and then to general volume and tone.

3- Override number 2 gives us both pickups in out of phase going to the second blend pot and then to general volume and tone.

The last switch we have is a 3 position sliding switch. This one is wired as on/off/on, with both on positions giving us a different treble bleed. One Duncan style and one Kinman style.

This was the simple schematic we come up with for the BBG guitar:

Budda Blues Guitar

For the BBG Junior guitar we simplified thing a little!

This guitar does not have the treble bleed options switch, and there is only one sliding switch present.

But first the Freeway present is this guitar is the Freeway 3×3-03, and gives us the same pickup combinations but in different positions like mentioned above.

As for the overriding sliding switch it gives us bridge+neck in out of phase with a dedicated blend pot.

One final note is to the on/on sliding switch used in this two guitars. All sliding switches are by Switchcraft, but the fact I want to point out is that the on/on we choose contains 4 rows of 3 poles, and this made possible to combine more than one “effect” on each switch.

Budda Blues Guitar Junior

If you are considering to spice up your wirings this switches might just be the thing you need!

Happy playing!

%d bloggers like this: